Pockets make life easier — it's just a fact. After all, haven't you ever thought about how much better your favorite party dress would be if it had pockets you could stick your hands (or lip gloss) into?
While it's easy to incorporate a pocket when making a garment from scratch, it's also super simple to sew a pocket into the side seam of something you bought off the rack. Bust out your seam ripper and get started!
How to Sew a Pocket
What You Need
- Garment (you can use your own WIP or a pre-made garment)
- Fabric for the pocket lining
- Pattern or DIY template
- Sewing pins
- Seam ripper
- Scissors or a rotary cutter
- Chalk or a fabric pen
If you’re not using a pattern, it's easy to draft your own. The shape you're going for is similar to a teardrop, but with one straight side (the bottom left side pictured below). Just make sure the pocket is big enough to fit your hand, and add a ½" seam allowance on all sides. Once you have your template on paper, cut it out.
1. Cut Out Two Pocket Pieces
Fold your pocket fabric in half and cut to make two pocket pieces, using your template as a guide.
Good to Know
Although you can make your pocket out of the same fabric as your garment (unless that fabric is extra bulky), this is a great time to use up scraps of fabric or play around with color. If you sew your pocket correctly, no one's going see what it looks like. It'll be your fun little secret.
2. Mark Your Pocket Placement
Using notches, a fabric pen or chalk, mark the placement of each pocket on the front and back pieces of your garment. This is where the top of the pocket will sit. If you’re adding the pocket to an existing garment, try the item on and use a mirror to determine where the pockets should go.
3. Pin Your Pockets
Take one of the pocket pieces and place it, right sides together, on your garment. Match the straight side of the pocket to the edge of the garment and the top of the pocket to the notch; pin in place. Repeat with the other pocket piece.
4. Start Stitching
Stitch the pocket in place with a ⅜" seam allowance. Using a slightly smaller seam allowance guarantees the pocket won’t show.
5. Turn Out Your Pockets
Turn the pocket pieces out and press.
6. Pin and Sew the Side Seams
Place the right sides of your garment together, with the pocket pieces turned away from the garment. Pin the side seams together and around the pocket pieces.
Sew the side seams as usual, following along the curve of the pocket.
7. Press and Flip
Press the side seams of your garment toward the front and turn the garment right side out. Your pocket should lay neatly inside. Finish the seams of the garment and pocket. You're done!